E-Flite Ultra Stick 1.1. ARF

Ultra Stick 1.1m ARF

Overview:
The Mini Ultra Stick was E-flite’s first-ever “wood” PNP (Plug-N-Play) and ARF (Almost-Ready-To-Fly) model that became an instant best-seller when it was released in 2005. It was available for more than a decade and is still iconic to this day because it went together as easily and in as little time as foam PNP models, yet offered the advantages of lightweight, stiff, and strong wood construction that delivered flight performance unlike similar class fully-molded EPS and EPO foam models.

The Ultra Stick 1.1m is an updated and upgraded version that is slightly larger to offer even better flight performance with extremely popular and common 3S or 4S 2200–3200mAh batteries. It’s available in an ARF version that bolts together and is ready for installation of your preferred power system and electronics, or in a BNF Basic version that’s equipped with four factory-installed servos, a Spektrum Avian Smart ESC and motor, plus a 6-channel receiver with AS3X and SAFE Select technologies.

Both versions are ready to accept two additional wing servos for “crow” and/or flaps plus full-span aileron/flaperon/spoileron setups, as well as optional wheel pants to look even more like the larger Hangar 9 Ultra Stick models the design is based on. That design offers excellent low-speed characteristics for easier landings, incredible high-speed handling, and impressive aerobatic capabilities that intermediate to experienced pilots will appreciate and enjoy!

The BNF (Bind-N-Fly) Basic version is equipped with four factory-installed metal-geared servos, a 3S and 4S compatible Spektrum motor, and an exclusive Avian 45-amp Smart Lite ESC that can provide a variety of real-time power system telemetry data with Smart and non-Smart batteries via compatible Spektrum AirWare™ equipped transmitters. It’s also equipped with an AR631 receiver to provide fly-by range and real-time telemetry data, including battery voltage, current, ESC temps, and more — plus motor reversing for special ground handling and other capabilities — along with the benefits of AS3X® and optional-use SAFE® Select technologies.

Or, the ARF (Almost-Ready-To-Fly) version is ready for installation of your preferred electronics and power system! And because it’s based on the design of larger Hangar 9 Ultra Stick models, it offers the same great low-speed flight characteristics that make for easier landings, along with excellent high-speed handling and outstanding basic to mild 3D aerobatic capabilities. You can even install the optional wheel pants (sold separately) to make it look more like larger Ultra Stick models! This makes it a perfect first-ever “wood,” everyday sport flying and aerobatic capable model for a wide range of pilots.

Features:

• Inspired by the iconic Mini Ultra Stick with modern-day technologies, features, and performance for “mild to wild” capabilities
• A great first-ever “wood,” everyday sport flying and aerobatic capable model for a wide range of pilots
• Popular and affordable 2200–3200mAh batteries deliver a wide range of performance and flight times
• Larger control surfaces for added control and sport to mild 3D aerobatic capabilities
• Fast and easy bolt-together assembly – no glue, tape, or special tools required
• The option to add two more wing servos to utilize crow and/or flaps plus full-span ailerons/flaperons/spoilerons
• One-piece wing with a fully-symmetrical airfoil that’s quick and easy to install/remove with a single thumbscrew
• Steerable tailwheel plus large tires for the ability to take off from/land on a variety of surfaces, including grass
• Strong and stiff – yet lightweight and long-lasting – built-up wood construction

In The Box:
(1) E-flite® Ultra Stick 1.1m
(1) Product Manual

Needed to Complete:
(1) Full-range 4+ Channel Transmitter and Receiver
(4 or 6) Sub Micro Servos
(1) 250–500 watt Capable Motor and ESC
(1) 3S 11.1V or 4S 14.8V 2200–3200mAh LiPo
(1) Compatible LiPo Charger